Xtar VC4S - Charger for Li-Ion 3.6V - 3.7V and NIMH 1.5V batteries
Item number: 500228
Manufacturer: Xtar
As the "S" in the model name already reveals, this is a luxury class of the VC series. The charger is suitable for both beginners and advanced users who want to know more about their batteries than just "full" or "empty". XTAR stands in the combination of the principle of technological progress and responsibility for safety and environmental protection.
The XTAR VC4S is a professional Li-Ion/NIMH battery charger.
With four independently functioning charging bays, for operation from any 5V USB port or to achieve full power from a Quick Charge USB power supply (400613).
Determining the actual capacity, discharging the batteries to the nominal voltage to protect the batteries during longer storage periods or the built-in QC processor to achieve full power of 4A (only with QC USB power supply) are the most important additions to the already very successful VC4 charger, besides the newly designed display.
Compatible with all USB mains and car adapters, input voltage and charging current is intelligently identified and adjusted. Power supply not included. (suitable QC USB power supply unit 400613, 400622)
The XTAR VC4S can detect, display and charge Ni-MH and Li-Ion batteries at the same time. The large, clear display shows: charging current, battery voltage, battery type, charged or discharged capacity in mAh of all battery compartments according to the set cycle.
The following Li-Ion battery types can be charged:
10440 / 14500 / 14650 / 16340 / 17335 / 17500 / 17670 / 18350 / 18490 / 18500 / 18650 / 18700.
The following batteries can only occupy 3 charging slots: 20700 / 21700 / 22650
The following batteries can only be charged in slot 1 and slot 4: 25500 / 26650 / 26700 / 32650
3.6V/3.7V Lithium-ion batteries.
Not suitable for protected 20700/21700 batteries. max. length 72mm.
The following Ni/MH Ni/CD battery types can be charged:
AAAA / AAA / A /
The following batteries can only be charged in slot 1 and slot 4: SC / C / D
Product information about the Xtar VC4S Charger:
- Xtar VC4S charger has four intelligent charging bays that work independently of each other.
- LCD display for real time, displaying charge voltage, battery status, battery type capacity in mAh of all battery bays.
- Three operating modes: charge, rate and store mode.
- Test the actual capacity and maximise the life of the batteries.
- QC3.0 fast charging, max. 3A for a single slot
- The Xtar VC4S can be used with any or "Quick Charge" USB adapter.
- Soft start function avoids battery damage caused by power surge
- 0V activation function to save deeply discharged batteries
- Micro USB input, charge anywhere
- IC temperature monitoring to prevent overheating from occurring
- Reverse polarity and short circuit protection
- Three-stage charging algorithm
- Charging method TC, CC CV,
- Intelligent identification of input power and automatic selection of charging method and charging current
- Automatic charge stop, charging stops automatically when battery is full.
Scope of delivery:
Xtar VC4S Charger, USB cable, Instruction manual in English, French, German, Italian, Spanish, Polish, Russian, Turkish.
Further information and testimonials about the VC4S Charger:
Safety instructions:
1. only charge the batteries intended for the unit.
Please always pay attention to the set charging voltage. 3.
3. charge only batteries with the appropriate charging voltage (danger of explosion).
4. the appliance is for household use, keep away from water and moisture!
5. disassembly and modification are strictly forbidden!
6. please avoid short circuit.
*Charging parameters:
| Input QC3.0 | 5.0V DC 3A / 9V DC 2A |
| Charging current | from 0.1A to 3.0A |
| Charging current distribution | 3Ax1/2Ax2/1Ax4/0,5Ax4 |
| Charging end voltage | 4.2V ± 0.05V / 1.45±0.1V |
| Resumption of charge for Li-Ion. | at 3.9V |
| No-load current consumption | 47mA to 200mA |
| Operating temperature | 0 °C - 40 °C |
| Weight without accessories | 220 |
*The above parameters are laboratory tested. Approximate values may vary between charger, batteries and environment.
Technical information and notes
The charging speed (charging current) of the batteries depends on the USB power supply. It is possible to select a weaker USB power supply, however, charging of the batteries is no longer possible at full current.
Suitable power supply unit to make full use of the charging current: Item number: 400613 FLYPOWER EP-18WQC3 Quick Charge, 400613 XTAR QC3.0 18W
Idle power consumption at 5V is approximately 200 mA when the display is bright 64 mA when the display is dimmed and 47 mA when the display is off.
At 0V, the charger reports "Err".
Above 0V, the charger estimates Ni/MH batteries and starts charging. This estimation is changed to Li-Ion as soon as the battery voltage reaches Li-Ion values.
Below 1.8 V, the charger assumes Ni/MH.
Above 1.8 V, the charger assumes Li-Ion.
After a power failure or insertion of the battery, charging continues.
When the unit is not connected to the power supply, approx. 1 mA is consumed by a Li-Ion and 0.1 A by a Ni/MH battery.
The current dial shows the maximum possible charging current, not the actual charging current. Use the "Cur" display for this purpose.
The mAh display flashes "Full" when the corresponding battery is full and the LED is green.
Shenzhen XTAR Electonics Co.,Ltd
Xtar
5th Floor, No.77 Xinhe Rd, Shangmugu,
Pinghu Area, Longgang District, Shenzhen, Guangdong
https://www.xtar.cc/
Luxtrim GmbH
Magnolienweg 8
63741 Aschaffenburg
Deutschland
info@luxtrim.de
Product Inquiries
Questions about the product via email
If you have further questions about the product, please contact: info@akkuteile.de
We will respond to your email within 1 business day.
You can reach our support team Monday to Friday from 9:00 AM to 3:00 PM at 06021 - 9212263
Payment Methods
PayPal - Delivery within 1–3 business days
Prepayment - Delivery within 1–3 business days after receipt of payment
Instant Bank Transfer - Delivery within 1–3 business days
Bank Transfer - Delivery within 1–3 business days after receipt of payment
Invoice - Delivery within 1–3 business days
Credit Card - Delivery within 1–3 business days
Information:
As soon as the payment is successfully received, you will automatically receive a confirmation by email.
For non-EU countries, only the net prices of the respective items apply, without German VAT. Customs fees will be charged separately. Import taxes must be paid according to the respective country's regulations.
Unless otherwise specified in the product description, delivery within Germany takes place within 1–5 days, and international deliveries within 3–9 days after order confirmation (in the case of agreed prepayment, after receipt of payment). Please note that there are no deliveries on Sundays and public holidays. In case of self-collection, we will inform you by email when the goods are ready and available for pickup. In this case, no shipping costs will be charged.
Shipping and delivery Monday – Friday
