Panasonic NCR18650BD 3.6V - 3.7V 3180mAh Li-ion industrial cell
Item number: 100606
Manufacturer: Panasonic 1
Industrial quality from Panasonic is not only highly valued by Tesla, but also by countless battery assemblers who rely on the high quality of Panasonic.
NCR18650BD from Panasonic with 3180mAh and max. 10A (constant) discharge current.
An all-rounder cell from Panasonic with high durability. Developed for laptops, LEDs, emergency lighting, modelling, storage systems, mobile energy, e-bikes, etc.
| Typical capacity | 3180mAh |
| Minimum capacity | 3080mAh |
| Nominal capacity | 3000mAh |
| Nominal voltage | 3,6V |
| Final charging voltage | 4,2V |
| Final discharge voltage | 2,5V |
| Charging current | max. 1.5A |
| Max. current output | 10A (10000mA) |
| Chemical composition | LiNiCoAlO2 |
| Protective circuit | not available |
| Positive pole | flat (flat top) |
| Diameter | 18.50 mm ± 0.1 mm |
| Height | 65.30 mm ± 0.15 mm |
| Weight | 49.5 g ± 1 g |
| Charging method | CC-CV |
| Safety data sheet | MSDS |
| Data sheet | Panasonic NCR18650BD |
Safety instructions:
Lithium cells may only be operated with protective electronics!
Please note that lithium cells may only be used by authorised specialist personnel.
Incorrect handling or short-circuiting can lead to fire or explosion.
Further properties:
Lithium-ion batteries are thermally stable and are not subject to a memory effect.
They work on the basis of lithium and are characterised by a high energy density.
*Further options:
- Without extras: Battery cell without options as in the main picture.
- Raised positive terminal: A button (nipple) welded to the positive terminal using a special welding process raises the flat positive terminal by approx. 2 mm, similar to a normal battery, for example (at extra cost).
- Solder lug: A metal tongue (W: 7mm x L: 25mm x D: 0.15mm), which is firmly connected to the positive and negative terminals of the battery and is used to solder a connecting wire or other batteries to the component. (for an extra charge)
U - Both solder tags point in one direction (e.g. for parallel connection or soldering to electronic components)
Z - Solder tags point in opposite directions. (e.g. series connection or construction-related soldering)
Notes on use and distribution.
Please note: The industrial cell has no integrated PCB/BMS electronic protection circuit and insufficient insulation for normal household use (e-cigarette, torch, etc.) and lacks labelling. The industrial cells are designed for further processing into battery packs or integrated use.
For use in e-cigarettes or e-shisha, we at Keeppower and Efest have the cells that are sufficiently insulated and labelled with important key figures, which are suitable for use in devices equipped exclusively with protective electronics.
| Charging current standard | 0.xx - 0.9A | |
| Charging current max. | 1,5A | |
| Internal resistance | <35Ω (Ohm) | |
| Operating temperature | Charging | 10~+45°C |
| Discharging | -20~+60°C | |
| Storage conditions | less than 1 month | -20~+50°C |
| less than 3 months | -20~+40°C | |
| less than 1 year | -20~+20°C | |
| Protective circuit | not available | |
| positive pole | Flat (Flat Top) | |
| Diameter | 18.50 mm ± 0.1 mm | |
| Height | 65.30 mm ± 0.15 mm | |
| Weight | 49.5 g ± 1 g | |
| Charging method | CC-CV | |
Notes:
Charging lithium-ion batteries requires a special charger that charges the batteries according to a special charging procedure. (CCCV = constant current, constant voltage.) The batteries must not be charged above a voltage of 4.2 volts, otherwise there is a risk of fire and explosion. It is advantageous to charge the batteries only up to approx. 4.1 volts, as this significantly increases the service life or number of charging cycles (possibly up to double). Only lithium-ion chargers may be used for charging. However, cheap chargers sometimes have the disadvantage that they do not switch off safely at the end of the charging process, but continue to charge the batteries with a low charging current, which can be dangerous.
Furthermore, rechargeable batteries and batteries do not belong in household waste! Please dispose of them as prescribed by law in the municipal collection centres or in the [usually green] containers provided for this purpose by retailers.
Panasonic Energy Co., Ltd.
Panasonic 1
Changjiang Rd. NO.40
214028 Wuxi New Area 214028 P.R. China
https://www.panasonic.com/global/energy/company/global-network.html
Luxtrim GmbH
Magnolienweg 8
63741 Aschaffenburg
Deutschland
info@luxtrim.de
06021-212263
Product Inquiries
Questions about the product via email
If you have further questions about the product, please contact: info@akkuteile.de
We will respond to your email within 1 business day.
You can reach our support team Monday to Friday from 9:00 AM to 3:00 PM at 06021 - 9212263
Payment Methods
PayPal - Delivery within 1–3 business days
Prepayment - Delivery within 1–3 business days after receipt of payment
Instant Bank Transfer - Delivery within 1–3 business days
Bank Transfer - Delivery within 1–3 business days after receipt of payment
Invoice - Delivery within 1–3 business days
Credit Card - Delivery within 1–3 business days
Information:
As soon as the payment is successfully received, you will automatically receive a confirmation by email.
For non-EU countries, only the net prices of the respective items apply, without German VAT. Customs fees will be charged separately. Import taxes must be paid according to the respective country's regulations.
Unless otherwise specified in the product description, delivery within Germany takes place within 1–5 days, and international deliveries within 3–9 days after order confirmation (in the case of agreed prepayment, after receipt of payment). Please note that there are no deliveries on Sundays and public holidays. In case of self-collection, we will inform you by email when the goods are ready and available for pickup. In this case, no shipping costs will be charged.
Shipping and delivery Monday – Friday
