Keeppower 14500 - *1500mAh, 3.6V - 3.7V Li-Ion battery **PCB protected P1450C4
Item number: 12115
Manufacturer: Keeppower
14500 lithium-ion batteries represent a further stage of development, offering a high capacity of *1500mAh. This further development opens up additional technical possibilities for making energy-intensive applications more efficient.
Electronically protected with **PCB/BMS 14500 Li-ion battery with *1500mAh
Protection/**PCB with short-circuit, overcharge and deep discharge protection, developed for torches, LEDs, modelling, etc.
With *1500mAh nominal capacity, the Keeppower P1450C3 battery is one of the most powerful batteries on the market. Equipped with a battery management system **(BMS), the battery is suitable for a wide range of applications.
Please note the dimensions of the cell before purchasing! Due to the built-in electronics **(PCB/BMS), the cell is not suitable for every application!
Height and diameter are larger than a standard 14500 cell without PCB.
| Model | P1450C3 |
| Typical capacity | *1500mAh at 0.2C discharge |
| Min. capacity | 1450mAh at 0.2C discharge |
| Nominal voltage | 3,6 - 3,7V |
| Final charge voltage | 4.2V ± 0.05V |
| Final discharge voltage | 2,50V |
| Positive pole | raised (button top) |
| Max. Discharge current | 2C = 3A |
| Protection circuit **PCB | integrated 4A |
| Charging current | 0.xx - 0.75A (750mA) |
| Charging method | CC-CV |
| Diameter | 14.3 mm ± 0.2 mm |
| Height | 52 mm ± 0.2 mm |
| Weight | 20 g ± 1 g |
| Data sheet | P1450C4 |
Safety note:
Please note that removing or damaging the protective electronics (PCB) can lead to a short circuit, fire or explosion.
Further properties:
Lithium-ion batteries are thermally stable and are not subject to a memory effect.
They work on the basis of lithium and are characterised by a high energy density.
Scope of delivery:
1x 14500 Li-ion rechargeable battery with *1500mAh
When ordered in pairs (two batteries), a battery box for 2 batteries is supplied.
* The nominal capacity of a rechargeable battery indicates the amount of energy it can store under ideal laboratory conditions. This value is measured at a constant temperature and under specified conditions to provide a reliable reference for the performance of the battery.
**A PCB (Printed Circuit Board) is the printed circuit board on which the circuit is located.
**A battery management system(BMS) or simply battery management is a measure, but usually an electronic circuit, which is used to monitor, control and protect batteries.
| Standard discharge current | 0.xx - 300mA |
| Normal charging current | 0.xxx - 750mA |
| Standard charge cut-off current | 30mA |
| Charging operating temperature | 0 °C - 45 °C |
| Discharging operating temperature | -20 °C - 60 °C |
Notes:
Charging lithium-ion batteries requires a special charger that charges the batteries using a special charging process. (CCCV = constant current, constant voltage.) The batteries must not be charged above a voltage of 4.2 volts, otherwise there is a risk of fire and explosion. It is advantageous to charge the batteries only up to approx. 4.1 volts, as this significantly increases the service life or number of charging cycles (possibly up to double). Only lithium-ion chargers may be used for charging. However, cheap chargers sometimes have the disadvantage that they do not switch off safely at the end of the charging process, but continue to charge the batteries with a low charging current, which can be dangerous.
Furthermore, rechargeable batteries and batteries do not belong in household waste! Please dispose of them as prescribed by law in the municipal collection centres or in the [usually green] containers provided for this purpose by retailers.
Keeppower
ADD: 7F, Bld 1, Huixun Industrial Park, 4 Baoshi Road 4
523723 Tangxia, Dongguan
Allen@Keeppower.com.cn
+86 769 82953418
www.keeppower.com.cn
Luxtrim GmbH
Magnolienweg 8
63741 Aschaffenburg
Deutschland
info@luxtrim.de
06021-9212263
Product Inquiries
Questions about the product via email
If you have further questions about the product, please contact: info@akkuteile.de
We will respond to your email within 1 business day.
You can reach our support team Monday to Friday from 9:00 AM to 3:00 PM at 06021 - 9212263
Payment Methods
PayPal - Delivery within 1–3 business days
Prepayment - Delivery within 1–3 business days after receipt of payment
Instant Bank Transfer - Delivery within 1–3 business days
Bank Transfer - Delivery within 1–3 business days after receipt of payment
Invoice - Delivery within 1–3 business days
Credit Card - Delivery within 1–3 business days
Information:
As soon as the payment is successfully received, you will automatically receive a confirmation by email.
For non-EU countries, only the net prices of the respective items apply, without German VAT. Customs fees will be charged separately. Import taxes must be paid according to the respective country's regulations.
Unless otherwise specified in the product description, delivery within Germany takes place within 1–5 days, and international deliveries within 3–9 days after order confirmation (in the case of agreed prepayment, after receipt of payment). Please note that there are no deliveries on Sundays and public holidays. In case of self-collection, we will inform you by email when the goods are ready and available for pickup. In this case, no shipping costs will be charged.
Shipping and delivery Monday – Friday
