Gyrfalcon All-88 Pro - 8-fold battery charger for Li-Ion 1.5V; 3.6 - 3.7V LiFePO4 3.2V & NiMH
Item number: 500525
Manufacturer: Enova
The new GyrFalcon ALL-88 Pro is your 8-slot charging centre that charges almost everything from AAAA to 26650 in parallel and remains individually adjustable per slot.
Pro version (from 08.2025)
In addition to the charging of 1.5 V Li-ion batteries, the display of charged capacity and precise setting of the charging current in 10 mA steps (only in advanced mode), the display has also been revised for a better overview. In addition to the functions of the standard version of the charger, the following functions have been added: Discharge function for precise capacity measurement, refresh function for NiMH batteries, storage mode for gentle storage of Li-ion batteries (3.6 V - 3.8 V) and precisely adjustable voltage (volts) and current (amps) for charging and discharging functions. (Further distinguishing features and data can be viewed under "Technical data")
Enova Gyrfalcon All-88 Pro battery charger with analyser function for Li-Ion, LiFePO4 & NiMH
The Enova Gyrfalcon All-88 Pro is a professional "multi-chemistry" charger for the following battery types:
Li-Ion 1.5 V / 3.6 V - 3.8 V (1.5 V - 4.2 V - 4.30 V - 4.35 V)
LiFePO₄ 3.2V (3.6V) and
NiMH/Ni-Cd 1.2V (1.45 - 1.6V).
The Gyrfalcon All-88 Pro offers eight completely independent and individually configurable charging bays, large enough to hold 8 × 26650 with excess length(max.72mm). Each bay has its own display showing the actual battery voltage, battery type, charging current, charged capacity, charging progress and elapsed time. The charging current can be set in small steps (10mA) from 0.1A (100mA) to 2A (2000mA), so that even the smallest batteries can be charged gently (only in advanced mode). At the same time, the Enova Gyrfalcon All-88 Pro is also powerful enough to charge even 8 large batteries simultaneously at 2A (only with a powerful PD power supply)
The following Li-Ion battery types can be charged with the Enova Gyrfalcon All-88:
10440 / 14500 / 14650 / 16340 / 16650 / 17500 / 17650 / 17670 / 18350 / 18490 / 18500 / 18650 / 18700 / 26500 / 26650 / 20700 / 21700 up to max. 72mm length.
As Li-ion batteries 1.5V, IMR, INR & ICR (nominal 3.6 V-3.8 V) up to optionally 4.20V, 4.30V or 4.35V (end-of-charge voltage >4.2V only adjustable in Pro mode)
or as LiFePO₄ batteries (nominal 3.2 V - 3.3V) up to 3.6V (only in Pro mode)
The following NiMH / Ni-Cd batteries can be charged:
AAAA / AAA / AA / C
Product features and characteristics:
- Advanced mode and auto mode (auto mode preset)
- Battery analysis functions for Li-ion 3.6V - 3.8V / LiFePO4 and NiMH batteries
- Discharge function for precise capacity measurement
- Refresh function for NiMH batteries
- Storage mode for gentle storage of Li-ion batteries (3.6 V - 3.8 V)
- Precisely adjustable voltage (volts) and current (amps) for charging and discharging functions
- Auto. Recognition of Li-ion (1.5 V / 3.6 V-3.7 V and 1.2 V NiMH batteries
- 8 × 26650 can be charged simultaneously.
- Charging of 1.5V Li-ion batteries.
- 8 independent charging slots with 72mm length.
- Power supply via USB power supply > 2 A (recommended PD 80 W) (not included)
- Each slot is individually configurable, charges different batteries in any combination
- Selectable end-of-charge voltage for Li-Ion: All-88 Pro 3.00V - 4.35V (end-of-charge voltage >4.20V can only be set in Pro mode)
- Charging current adjustable in small (10mA) steps from 100 mA to 2000 mA
- Separate display showing the actual battery voltage, battery type, charging current, time or charged capacity for each slot. Capacity for each slot.
- Reverse polarity protection, overcharge protection, overload protection, flame-retardant ABS housing
- RoHS, CE & FCC certified
INFO: When charging 1.5 V Li-ion batteries, the charger may display a voltage of around 4.84 V. This is normal and not a defect. This is normal and not a defect. This voltage is required to supply the electronics integrated in the battery, which are used to charge the actual cell core. The electronics convert the voltage internally to the appropriate charging voltage for the cell core.
You do not need to worry about this - this behaviour is inherent to the design and is common for 1.5 V Li-ion batteries with integrated regulation.
Scope of delivery:
All-88 Pro charger, USB-C to DC cable German instructions.
Optional PD-USB power supply > 45 W, 65 W, 80W or 100W for an additional charge ( the supplied power supply version may differ visually from the illustration, but fulfils more than all current European safety standards and technical requirements).
Frequently asked questions about the GyrFalcon ALL-88
Which battery types does the ALL-88 support?
Can I charge different cell sizes at the same time?
What does "adjustable charging current in small increments" mean?
Why does the charger sometimes display ~4.8 V for 1.5 V Li-ion batteries?
Why is "charged capacity" different from "measured discharge capacity"?
Are there any tips for the best possible measurement results (testing/grading)?
Note: The actual compatibility may vary depending on the battery version (e.g. length for protected cells, integrated electronics for 1.5 V Li-ion).
Technical data - GyrFalcon ALL-88 & All-88 Pro
| All-88 (advanced mode) | All-88 Pro (Fortge. Mode) | |
| Charging | Yes (Li-Ion, LiFePO4, NiMH) | Yes (Li-Ion, LiFePO4, NiMH) |
| Discharge | No | Yes |
| Refresh | No | Yes |
| Storage | No | Yes |
| Charge current setting Li-Ion | from 0.1A to 1.0A in 0.01A increments | from 0.1A to 2.0A in 0.01A increments |
| Charge current setting NiMH | from 0.1A to 1.0A in 0.01A steps | from 0.1A to 2.0A in 0.01A steps |
| Charging current set value LiFePO4 | from 0.1A to 1.0A in 0.01A steps | from 0.1A to 2.0A in 0.01A steps |
| Charging current set value 1.5V Li-ion | not possible | |
| Max. charging current | 8 x 1 ampere | 8 x 2 Ampere |
| Discharge current, set value Li-ion | from 0.1A to 0.5A in 0.01A steps | |
| Discharge current, set value NiMH | from 0.1A to 0.5A in 0.01A steps | |
| Discharge current, set value LiFePO4 | from 0.1A to 0.5A in 0.01A steps | |
| Discharge current, set value 1.5V Li | not possible | |
| V setting range Li-ion charging | from 3.00V to 4.26V in 0.01V steps | from 3.00V to 4.26V in 0.01V steps |
| V setting range NiMH charging | from 1.00V to 1.70V in 0.01V steps | from 1.00V to 1.70V in 0.01V steps |
| V setting range LiFePO₄ charge | from 2.50V to 3.70V in 0.01V steps | from 2.50V to 3.70V in 0.01V steps |
| V setting range 1.5V Li charge | not possiblenot possible | |
| V setting range Li-Ion discharge | from 2.50V to 4.35V in 0.01V steps | |
| V setting range NiMH discharge | from 0.50V to 1.55V in 0.01V steps | |
| V Settings range LiFePO₄ discharged | from 2.50V to 3.60V in 0.01V steps | |
| V Setting range 1.5V Li discharged | is not supported | |
| Input power | DC10-20V/45W | DC10-20V/80W |
| Operating voltage range | 0.5 V 5.0 V / channel | |
| Max. Max. capacity | 9999 mAh or 9999 mWh | |
| UI mode | AUTO and advanced mode | |
| Safety timer | 1000 min | |
| Charging algorithm | NiMH/NiCD CC with -dV or 0dV | Li-xx CC-CV with TC | |
| CV cut-off current | 10 % + charging current/80mA | |
| -dV Sensitivity NiMH | 0dV or 3mV | |
| Voltage measurement | ± 10 mV, internal resolution ≤ 1% | |
| Current measurement | ± 10 mA, internal resolution ≤ 1% | |
| Stand-by current consumption | < 1 mA per charging slot | |
| Dimensions | 245 x 155 x 32 mm | |
| Weight | 466 g (charger only) | 450 g (charger only) |
| Operating temperature | 0 °C ~ °C ~ 40 °C | |
| Storage temperature | -20 °C ~ +85 °C | |
SHENZHEN ENOVA TECHNOLOGY CO.,LTD
Enova
408, Building 2, Bao Yi Creative Park
Huarong Road, Dalang Street, Baoan District
https://enova18650.com/
Luxtrim GmbH
Magnolienweg 8
63741 Aschaffenburg
Deutschland
info@luxtrim.de
Product Inquiries
Questions about the product via email
If you have further questions about the product, please contact: info@akkuteile.de
We will respond to your email within 1 business day.
You can reach our support team Monday to Friday from 9:00 AM to 3:00 PM at 06021 - 9212263
Payment Methods
PayPal - Delivery within 1–3 business days
Prepayment - Delivery within 1–3 business days after receipt of payment
Instant Bank Transfer - Delivery within 1–3 business days
Bank Transfer - Delivery within 1–3 business days after receipt of payment
Invoice - Delivery within 1–3 business days
Credit Card - Delivery within 1–3 business days
Information:
As soon as the payment is successfully received, you will automatically receive a confirmation by email.
For non-EU countries, only the net prices of the respective items apply, without German VAT. Customs fees will be charged separately. Import taxes must be paid according to the respective country's regulations.
Unless otherwise specified in the product description, delivery within Germany takes place within 1–5 days, and international deliveries within 3–9 days after order confirmation (in the case of agreed prepayment, after receipt of payment). Please note that there are no deliveries on Sundays and public holidays. In case of self-collection, we will inform you by email when the goods are ready and available for pickup. In this case, no shipping costs will be charged.
Shipping and delivery Monday – Friday
