Inexpensive BAK cell for storage systems or as a power supply for numerous mobile applications such as e-bikes, power banks, torches and much more.

Standard cell with 2600mAh and max. 7.5A discharge current, BAK N18650CH.

Due to the scarcity of rechargeable batteries on the international market, cells like the N18650CH will play a major role. For many battery pack assemblers, batteries from BAK, Lishen or DLG will play a decisive role. As a replacement for the very often used and scarce cells like ICR18650-26F or ICR18650J from Samsung.

The cells are not suitable for applications with high current output above 7 amps approx. 20W (e-cigarettes or power tools).
Suitable for: storage systems, e-bikes, laptop, LED applications, model making and anywhere constant discharge current does not exceed 3C (7.5A).

Short info to manufacturer:

Innovative manufacturing processes in BAK factories enable competitive products at the best price-performance ratio. BAK is an internationally operating company. The branch responsible for Europe has been located in Germany for several years. Due to the innovation of its own factories, BAK is able to keep up with and in some cases surpass the top-class competition.

Technical data of the BAK N18650CH

Data sheets for the BAK N18650CH:

H18650CH (Data sheet)

UN38.3 (Test Report) UN38.3 (Summary)

Drop test 1.2 m and 3.0 m

MSDS (Safety Data Sheet)

UN2021:0001-2 (Safety Data Sheet Ship)

UN2021:0001-2 (Safety Data Sheet Aircraft)

Safety instructions:

Lithium cells may only be operated with protective electronics!
Please note that lithium cells may only be used by authorised qualified personnel.
Incorrect handling or short-circuiting may result in fire or explosion.

*Other options:

- No selection: Battery cell without options as in the main picture.
- Raised positive terminal: A button (nipple) welded onto the positive terminal by means of a special welding process raises the flat positive terminal by approx. 2 mm, similar to a normal battery (at extra cost).
- Solder tag: A metal tongue (W: 7.0 mm x L: 25.0 mm x D: 0.15 mm), which is firmly connected to the battery at the plus and minus pole and is used to solder a connecting wire or further batteries to the component (at an extra charge).
U - Both solder tags point in one direction (e.g. for parallel connection or soldering to electronic components).
Z - Solder tags point in opposite direction (e.g. for series connection or soldering to electronic components).

Other properties:

Lithium-ion batteries are thermally stable and are not subject to memory effect.
They work on the basis of lithium and are characterised by a high energy density.

Scope of delivery:

1x BAK H18650CH lithium-ion battery

Notes:

Charging lithium-ion batteries requires a special charger that charges the batteries according to a special charging procedure (CCCV = constant current, constant voltage.) The batteries must not be charged above a voltage of 4.2 volts, as otherwise there is a risk of fire and explosion. It is advantageous to charge the batteries only up to approx. 4.1 volts, as this significantly increases the service life or the number of charging cycles (possibly up to double). Only lithium-ion chargers may be used for charging. However, the cheap chargers sometimes have the disadvantage that they do not switch off safely at the end of the charging process, but continue to charge the batteries with a small charging current, which can be dangerous.

Furthermore, rechargeable batteries and batteries do not belong in household waste! Please dispose of them as prescribed by law at the municipal collection points or in the [usually green] containers provided by retailers.

ZHENGZHOU BAK BATTERY CO., LTD

BAK

The intersection 300meters West of Zhongxin Road & BAK Avenue, Zhongmu Country, Zhengzhou

451450 Henan

Onni-Tec GmbH

Broyhansweg 28

31199 Diekholzen

Deutschland

info@onni-tec.de