Silicone cable 22 AWG 0.3 mm² 200°C 300V flexible tinned by the metre
Item number: 400519
Manufacturer: Keeppower
The 22 AWG silicone cable is a flexible, heat-resistant cable for many applications in the electronics, modelling and battery sectors. Thanks to the fine-wire construction made of tinned copper and the silicone insulation, the cable is easy to work with and remains pleasantly flexible even with frequent bending. The cable is sold by the metre.
Silicone cable 22 AWG 200°C 300V - flexible cable by the metre for electronics, model making and battery technology
With a conductor cross-section of 0.3 mm², a rated voltage of 300V and a temperature resistance of up to 200°C, the cable is suitable for many technical applications where flexibility and temperature resistance are required. The outer diameter is approx. 1.7 mm. According to the data sheet, the conductor consists of 60 x 0.08 mm tinned copper wires.
Highlights of the silicone cable 22 AWG
- 22 AWG / 0.3 mm² silicone cable by the metre
- Heat resistant up to 200°C
- Rated voltage 300V
- Fine-wire construction with 60 x 0.08 mm tinned copper
- Flexible silicone insulation for good workability
- Outer diameter approx. 1.7 mm
- Electrical current according to data sheet: 3.0A
- RoHS 2.0 and REACH compliant
- FT2 flame test according to data sheet
Documents for download
Further technical and product-specific information can be found in the following documents:
- Technical data sheet
- REACH report conductor material
- RoHS report conductor material
- RoHS test report silicone cable
Important technical data
| Most important technical data | |
|---|---|
| Conductor cross-section | 0.3 mm² |
| Conductor material | Tinned copper |
| Insulation material | Silicone rubber |
| Rated voltage | 300 V |
| Temperature resistance | 200 °C |
| Max. Current carrying capacity | 3,0 A |
| Outer diameter | 1.7 ± 0.10 mm |
Further technical details can be found in the "Technical data" tab .
Scope of delivery
- 1x silicone cable 22 AWG by the metre in the ordered length and colour
Note: The unit "1 piece" corresponds to 1 metre. If you order several metres (e.g. 3 pieces), we usually deliver the total length in one piece - if technically and stock-related possible.
Frequently asked questions about silicone cable 22 AWG
Is the cable sold by the metre?
What applications is the cable suitable for?
How high is the temperature resistance?
What cross-section does the cable have?
Is the cable flexible?
What is the outer diameter?
Is the cable RoHS and REACH compliant?
Can I use the cable for high currents?
| Basic data | |
|---|---|
| Product type | Silicone cable / silicone stranded wire |
| Article number / Part No. | ZX-WIRE-10006 |
| Designation | SR-1C Silicone Rubber Cable |
| Conductor cross-section | 0.3 mm² |
| AWG | 22 AWG |
| Conductor construction | 60 x 0.08 mm |
| Outer diameter | 1.7 ± 0.10 mm |
| Temperature resistance | 200 °C |
| Core colour | According to customer requirements / depending on variant |
| Printing | 22AWG 200℃ |
| Electrical data | |
|---|---|
| Rated voltage | 300 V |
| Max. Current carrying capacity | 3,0 A |
| Resistance at 20 °C (max.) | 59.4 Ohm/km |
| Spark test | 3000 V |
| Dielectric strength | 2000 V / 1 minute |
| Material & test values | |
|---|---|
| Conductor material | Tinned, annealed copper |
| Insulation material | Silicone rubber |
| Min. average insulation thickness | 0.49 mm |
| Min. insulation thickness at each point | 0.39 mm |
| Flame test | FT2 |
| Heat shock test | No cracking at 232 ± 2.0 °C / 1 h |
| Cold bending test | No cracking at -15 ± 2.0 °C / 4 h |
| Tensile strength | 503 PSI min. |
| Elongation | 100 % min. |
| Ageing test | 232 ± 1.0 °C × 168 h |
| Conformity | RoHS 2.0, REACH |
| Reference standard | UL / CSA |
Comparison: Silicone cable 22 AWG to 14 AWG
The smaller the AWG number, the thicker the wire - and the higher the current carrying capacity. This table will help you select the right silicone cable for your application:
| 22 AWG | 20 AWG | 18 AWG | 16 AWG | 14 AWG | |
|---|---|---|---|---|---|
| Cross section | 0.33 mm² | 0.5 mm² | 0.82 mm² | 1.3 mm² | 2.1 mm² |
| Current carrying capacity | up to approx. 3 A | up to approx. 5 A | up to approx. 7-10 A | up to approx. 13-15 A | up to approx. 20 A |
| Outer diameter (approx.) | 1.7 mm | 1.8 mm | 2.2 mm | 2.6 mm | 3.2 mm |
| Typical application | Signal & LED cables | Model making, electronics | Battery packs, charging cables | RC models, powerful consumers | Motor cables, industry |
All versions are flexible, heat-resistant up to 200 °C and are sold by the metre.
Keeppower
ADD: 7F, Bld 1, Huixun Industrial Park, 4 Baoshi Road 4
523723 Tangxia, Dongguan
Allen@Keeppower.com.cn
+86 769 82953418
www.keeppower.com.cn
Luxtrim GmbH
Magnolienweg 8
63741 Aschaffenburg
Deutschland
info@luxtrim.de
06021-9212263
Product Inquiries
Questions about the product via email
If you have further questions about the product, please contact: info@akkuteile.de
We will respond to your email within 1 business day.
You can reach our support team Monday to Friday from 9:00 AM to 3:00 PM at 06021 - 9212263
Payment Methods
PayPal - Delivery within 1–3 business days
Prepayment - Delivery within 1–3 business days after receipt of payment
Instant Bank Transfer - Delivery within 1–3 business days
Bank Transfer - Delivery within 1–3 business days after receipt of payment
Invoice - Delivery within 1–3 business days
Credit Card - Delivery within 1–3 business days
Information:
As soon as the payment is successfully received, you will automatically receive a confirmation by email.
For non-EU countries, only the net prices of the respective items apply, without German VAT. Customs fees will be charged separately. Import taxes must be paid according to the respective country's regulations.
Unless otherwise specified in the product description, delivery within Germany takes place within 1–5 days, and international deliveries within 3–9 days after order confirmation (in the case of agreed prepayment, after receipt of payment). Please note that there are no deliveries on Sundays and public holidays. In case of self-collection, we will inform you by email when the goods are ready and available for pickup. In this case, no shipping costs will be charged.
Shipping and delivery Monday – Friday
