Li-ion battery US18650VTC6 - 3120mAh, 3.6V - 3.7V max. discharge current 30A
Item number: 100680-Z
Manufacturer: Murata
One of the most popular cells on the international market. The cell has been on the market for several years and has been continuously improved and is regularly tested by us and well-known battery testers such as Mooch.
Please note: The industrial cell has no integrated PCB/BMS electronic protection circuit and insufficient insulation for normal household use (e-cigarette, torch, etc.) and lacks labelling. The industrial cells are designed for further processing into battery packs or integrated use.
For use in e-cigarettes or e-shisha, Keeppower offers the US18650VTC6-NH1826 cells, which are sufficiently insulated and labelled with important key figures and are suitable for use in devices equipped exclusively with protective electronics.
US18650VTC6 discharge current (pulse) up to 30A
Due to the high capacity and simultaneously high current output, the US18650VTC6 cell can be used in almost all areas. Particularly noteworthy areas of application: E-mountain bikes or e-road bikes, as well as power tools and various industrial sectors. They can also be used in pedelecs (e-bikes), battery carriers, model making, robotic mowers, robot vacuum cleaners, etc.
The powerful NMC Li-ion cell enables a wide range of applications.
However, the cell achieves good and safe values up to 20A discharge current.
Technical properties of the US18650VTC6 industrial cell.
| Type. Capacity | 3120mAh |
| Min. capacity | 3000mAh |
| Nominal voltage | 3.6V - 3.7V |
| Final charging voltage | 4.2V ± 0.05V |
| Final discharge voltage | 2,0V |
| Recommended charging current | 0.xx - 3A |
| Max. charging current Charging current | 0.xx - 5A |
| Max. current output, with temp. monitoring up to 80° | 30A |
| Max. current output without temp. monitoring | 15A |
| Protective circuit PCB | Not available |
| Positive pole | Flat (Flat Top) |
| Diameter | 18.35 mm ± 0.15 mm |
| Height | 65.0 mm ± 0.2 mm |
| Weight | 46.6 g ± 1.2 g |
| Charging method | CC-CV |
| Rating and discharge curves | www.e-cigarette-forum.com |
| Evaluation and discharge curves | Lygte info |
Data sheet: US18650VTC6
SDS (SAFETY DATA SHEET): US18650VTC6
UN 38.3 (BATTERY TRANSPORTION INFORMATION): US18650 VTC6
RoHS certificates: US18650 VTC6
Data sheet (technical information 2015): US18650VTC6
Safety instructions:
Lithium cells may only be operated with protective electronics!
Please note that lithium cells may only be used by authorised specialist personnel.
Incorrect handling or short-circuiting can lead to fire or explosion.
The batteries are not suitable and intended for use by consumers. Manufacturing sells the batteries exclusively in the commercial trade (B2B) for further processing and production of battery packs for use in closed battery packs for household appliances, bicycles and tools.
Further properties:
Lithium-ion batteries are thermally stable and are not subject to a memory effect.
They work on the basis of lithium and are characterised by a high energy density.
*Further options:
- Without extras: Battery cell without options as in the main picture.
- Raised positive terminal: A button (nipple) welded to the positive terminal using a special welding process raises the flat positive terminal by approx. 2 mm, similar to a normal battery, for example (at extra cost).
- Soldering lug: A metal tongue (W: 7.0 mm x L: 25.0 mm x D: 0.15 mm), which is firmly connected to the positive and negative terminals of the battery and is used to solder a connecting wire or other batteries to the component (for an extra charge).
U - Both solder tags point in one direction (e.g. for parallel connection or soldering to electronic components)
Z - Solder tags point in opposite directions. (e.g. for series connection or soldering to components)
| Charging current normal/charging time | 3A/2.5h |
| Max. charging current/charging time | 6A/2h |
| Battery-friendly charging current | 0.xx - 2A |
| Charging operating temperature | 0 °C - 45 °C |
| Discharging operating temperature | -20 °C - 60 °C |
Notes:
Charging lithium-ion batteries requires a special charger that charges the batteries using a special charging process. (CCCV = constant current, constant voltage.) The batteries must not be charged above a voltage of 4.2 volts, otherwise there is a risk of fire and explosion. It is advantageous to charge the batteries only up to approx. 4.1 volts, as this significantly increases the service life or number of charging cycles (possibly up to double). Only lithium-ion chargers may be used for charging. However, cheap chargers sometimes have the disadvantage that they do not switch off safely at the end of the charging process, but continue to charge the batteries with a low charging current, which can be dangerous.
Furthermore, rechargeable batteries and batteries do not belong in household waste! Please dispose of them as prescribed by law in the municipal collection centres or in the [usually green] containers provided for this purpose by retailers.
Murata Electronics Singapore (Pte.) Ltd.
Murata
200 Yishun Avenue 7, Singapore 768927
768927
https://corporate.murata.com/en-eu/company/muratalocations/branch
Onni-Tec GmbH
Broyhansweg 28
31199 Diekholzen
Deutschland
info@onni-tec.de
Product Inquiries
Questions about the product via email
If you have further questions about the product, please contact: info@akkuteile.de
We will respond to your email within 1 business day.
You can reach our support team Monday to Friday from 9:00 AM to 3:00 PM at 06021 - 9212263
Payment Methods
PayPal - Delivery within 1–3 business days
Prepayment - Delivery within 1–3 business days after receipt of payment
Instant Bank Transfer - Delivery within 1–3 business days
Bank Transfer - Delivery within 1–3 business days after receipt of payment
Invoice - Delivery within 1–3 business days
Credit Card - Delivery within 1–3 business days
Information:
As soon as the payment is successfully received, you will automatically receive a confirmation by email.
For non-EU countries, only the net prices of the respective items apply, without German VAT. Customs fees will be charged separately. Import taxes must be paid according to the respective country's regulations.
Unless otherwise specified in the product description, delivery within Germany takes place within 1–5 days, and international deliveries within 3–9 days after order confirmation (in the case of agreed prepayment, after receipt of payment). Please note that there are no deliveries on Sundays and public holidays. In case of self-collection, we will inform you by email when the goods are ready and available for pickup. In this case, no shipping costs will be charged.
Shipping and delivery Monday – Friday
