The 25P is a high-current cell that can effortlessly power devices such as electric impact wrenches, chisels, angle grinders, etc. through max. current output of 30A (constant).

High-current cell with 2500mAh and max. 30A discharge current, EVE INR18650-25P.

The cells are suitable for: battery carriers, model making, power tools, high-tech divers. and torches. Applications can be found for such cells wherever short run times, high current requirements (amperes), low weight and limited space play a major role.

Statement:

Due to the shortage of rechargeable batteries on the international market, cells such as those from EVE will play a major role. For many battery pack assemblers, the batteries from BAK, Lishen, DLG and EVE will make a decisive contribution. The INR18650-25P is best suited as replacement for the INR18650-25R from Samsung or Murata (Sony) US18650VTC5.

Short info about manufacturer:

EVE Energy Co. Ltd. was founded in 2001. After 21 years of rapid development, EVE is now a global lithium battery company with core technologies and solutions for consumer, energy, IoT and renewable applications. www.evebattery.com

Technical data of the EVE INR18650/25P

Rating and discharge curves:

https://www.e-cigarette-forum.com

Data sheets for the EVE INR18650/25P:

INR18650/25P (data sheet)

UN38.3 (Test Report)

IEC (62133)

MSDS (Safety Data Sheet)

Safety instructions:

Lithium cells may only be operated with protective electronics!
Please note that lithium cells may only be used by authorised qualified personnel.
Incorrect handling or short-circuiting may result in fire or explosion.

Further characteristics:

Lithium-ion batteries are thermally stable and are not subject to memory effect.
They work on the basis of lithium and are characterised by a high energy density.

Scope of delivery:

1x EVE INR18650/25P lithium-ion battery

*Other options:

- No selection: battery cell without options as in the main picture.
- Raised positive terminal: A button (nipple) welded to the positive terminal by means of a special welding process raises the flat positive terminal by approx. 2 mm, similar to a normal battery (for an additional charge).
- Solder tag: A metal tongue (W: 7mm x L: 25mm x D: 0.15mm), which is firmly connected to the battery at the plus and minus pole and is used to solder a connecting wire or further batteries to the component (at an extra charge).
U - Both solder tags point in one direction (e.g. for parallel connection or soldering to electronic components).
Z - Solder tags point in opposite direction (e.g. for series connection or soldering to electronic components).

Notes:

Charging lithium-ion batteries requires a special charger that charges the batteries according to a special charging procedure. (CCCV = constant current, constant voltage.) The batteries must not be charged above a voltage of 4.2 volts, otherwise there is a risk of fire and explosion. It is advantageous to charge the batteries only up to approx. 4.1 volts, as this significantly increases the service life or the number of charging cycles (possibly up to double). Only lithium-ion chargers may be used for charging. However, the cheap chargers sometimes have the disadvantage that they do not switch off safely at the end of the charging process, but continue to charge the batteries with a small charging current, which can be dangerous.

Furthermore, rechargeable batteries and batteries do not belong in household waste! Please dispose of them as prescribed by law at the municipal collection points or in the [usually green] containers provided by retailers.