Xtar VC2 Plus Master was replaced by XTAR VC2S replaced.

As a groundbreaking innovation, the VC2 Plus Master is equipped with several additional features compared to the VC2 charger:

• Countdown timer, shows the duration of the charging process until the batteries are fully charged.
• Charging of NIMH batteries has been made possible, whereby both charging bays function independently of each other and charging of two different battery types is possible
• Charging current selection 0.5A/1.0A so you can choose the charging speed depending on the battery type
• Integrated USB output with power path management system allows you to charge both batteries and the external device at the same time while the power bank is connected!
• Powerbank function with one battery inserted

The following battery types can be charged: 10440 / 14500 / 14650 / 16340 / 17335 / 17500 / 17670 / 18350 / 18490 / 18500 / 18650 / 18700 / 22650 / 25500 / 26650 / 20700 / 21700
Charging of 32650 batteries not possible.
3.6V / 3.7V Li-ion / IMR / INR / ICR Lithium Ion batteries.

The following NIMH battery types can be charged:
AAAA / AAA / AA / A / SC / C / D (For D only one battery at a time and with large positive terminal) Ni-MH / Ni-Cd.

Product Information:

• Xtar VC2 charger has 2 Intelligent independently functioning charging bays.
• LCD display with countdown counter and charge status display (percentage) for both battery bays independently.
• PowerBank function with battery status display to avoid deep discharge of the batteries.
• Automatic selection of charging method  TC-CC-CV for Li-Ion and pulse for NIMH batteries
• XTAR Up-to-date buffering charging technology protects the batteries from high current fluctuations while charging
• 0V activation function to save over-discharged batteries
• The Xtar VC2 can be powered by any 5V USB adapter, recommended 5V 2.1A (suitable adapter item no. 400609)
• Soft Start" function, avoids battery damage caused by power surge
• IC temperature monitoring, to avoid overheating
• Reverse polarity and short circuit protection
• Automatic charge stop, charging stops automatically when the battery is full. Resumes charging when battery voltage is below 3.9V
• Three-stage charging algorithm
• Charging methods TC, CC CV
• Compact size

Safety instructions:

1. charge only the Li-ion batteries intended for the unit s use.
Always pay attention to the charging voltage setting. 3.
3. only charge batteries with a suitable charging voltage (risk of explosion).
4. device is for domestic use, keep water and moisture away!
5. disassembly and modification are strictly prohibited!
6. please avoid short circuit.

Scope of delivery: Xtar VC2 Plus Charger, USB Cable, Manual English

Notice:

The above parameters are laboratory tested. Approximate values may vary between charger, batteries and environment.